User Manual

CE Notice

CSI products bearing the symbol on the product

or in the user’s manual are in compliance with appli-

cable EMC and Safety Directives of the European Union.

In accordance with CENELEC standard EN 50082-2,

normal intended operation is speciﬁed as follows:

1. The product must not pose a safety hazard.

2. The product must not sustain damage as a result of

use under environmental conditions speciﬁed in

the user documentation.

3. The product must stay in or default to an operating

mode that is restorable by the user.

4. The product must not lose program memory, user-

conﬁgured memory (e.g., routes), or previously

stored data memory. When apparent, the user may

need to initiate a reset and/or restart of a data

acquisition in progress.