Reference Manual UltraSpec® ProAlign Plus Laser Alignment Analyzer and Fixtures CSI Part #97505 Rev.
Copyright © 2001 by Computational Systems, Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Computational Systems, Incorporated (CSI). Disclaimer This manual is provided for informational purposes.
License Agreement IMPORTANT: CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT BEFORE OPENING THE PACKAGE OR PROCEEDING WITH INSTALLATION. OPENING THE PACKAGE OR COMPLETING THE INSTALLATION INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT, CANCEL ANY INSTALLATION, PROMPTLY RETURN THIS PRODUCT AND THE ASSOCIATED DOCUMENTATION TO CSI AND YOUR MONEY WILL BE REFUNDED.
Hardware Technical Help 1. Please have the number of the current version of your firmware ready when you call. The version of the firmware in CSI’s Model 2100 series, Model 2400, and other analyzers appears on the powerup screen that is displayed when the analyzer is turned on. 2. If you have a problem, explain the exact nature of your problem. For example, what are the error messages? When do they occur? Know what you were doing when the problem occurred.
CE Notice CSI products bearing the symbol on the product or in the user’s manual are in compliance with applicable EMC and Safety Directives of the European Union. In accordance with CENELEC standard EN 50082-2, normal intended operation is specified as follows: 1. The product must not pose a safety hazard. 2. The product must not sustain damage as a result of use under environmental conditions specified in the user documentation. 3.
vi
