User Manual

4-5
General Description
LED Status Meaning Required Action
Green Yellow Red
X
Normal Operation - When the
Laser Head systems are all
functioning properly and the
laser beam from the
companion Laser Head is
striking the PSD in the linear
region. This is the desired
state. The Laser Head is in the
acceptable condition to
perform an alignment.
No Action Required
X (flashing)
Sensor head in standby (sleep)
mode - When the Laser Head
sees no activity for five
minutes, they automatically
places themselves in Sleep
Mode to conserve battery
power. The color will be the
one that was active, solid or
flashing, before this state was
entered. When this sleep
mode is entered, the LED will
be flashed off for 1.5 sec. and
on for 0.5 sec.
Use analyzer to wake up
when needed by initiating
communication with the laser
heads.
X
Minor Error* Refer to “Laser Head Status
Screen” on page 3-8 for more
information on the error and
the required action.