User Manual

3-17
Options Key
From the third screen, turn the A-head off and B-head on, then press Enter
to continue to the next screen.
10
The forth screen will display the address received from the B-head. If the
address is not correct or you wish to change the address type in the new
address (different then the A-head address) from 1 to 10 using the number
keys on the keypad and press Enter to continue to the Alignment Options
menu. If the address is correct then press Enter to continue back to the
Alignment Options menu.
Note
If you enter a number outside the range of 1 to 10 or try to
enter two addresses which are the same you will get a warning
telling you of the error and to repeat the procedure.