User Manual

3-5
Options Key
Delete Job(s)
Delete Job(s) is used to erase individual jobs or all data in the analyzer’s
stored memory. When Individual Job is selected, a list of jobs in storage will
be displayed. Using the Up and Down Arrow keys, you can then select the
job to be erased by pressing the Enter key.
When deleting an individual job, you will receive a Warning prompt asking
if you want to delete the selected job and displays a screen stating that it was
deleted successfully. Also displayed on this screen is the amount of “Free
Memory” (in bytes) available in the analyzer. Press Enter to continue and
return to the Delete Job menu.
If you wish to cancel and not delete the selected job, pressing the Page Up
key will abort the operation and return you to the Delete Job menu.
2
If All Jobs is selected, the following warning screen will be displayed. Press
any key to toggle Yes or No. Press Enter to continue. Answering Yes deletes
all jobs stored (including the active job) in the analyzer and displays a
screen stating that they were deleted successfully.