User Manual

1-15
Installing the Application
Figure 3. Download Procedure Flowchart (page 2 of 2)
On analyzer: select Load Firmware and press
the Enter key. See Note 1
End
On analyzer: press the Utility key (the Utility
Functions menu is displayed)
On analyzer: select System Setup (the System
Setup menu is displayed)
On analyzer: select Yes and press the Enter
key
On computer: place application
diskette in drive A: (or B:) and
press the Reset/Main key
Continued from previous page.
On analyzer: is message “Error:
No Downloadable Programs on
Current Host Disk” displayed?
Yes No
On analyzer: select application for loading and
press the Enter key
On analyzer: the question, “Load
Another?” is displayed
No Yes
On analyzer: select Yes
and press the Enter key
On analyzer: is application
to be loaded listed?
No Yes
On analyzer: select No, press the Enter key,
and then select the active application
On computer: exit Download program
Note 1: Since both firmware
and applications must be
loaded at the same time,
always load the firmware first.