User Manual

3-35
Notes Key
Notes Key
The Notes key is used to access the Alignment Notepad screen, which pro-
vides a list of 70 predefined notes. Up to 29 user-defined notes can also be
entered for a total of 99. These notes can be used to record observations
concerning the machinery being monitored and of the alignment job itself.
Up to 40 notes can be stored with each alignment job, and along with the
remaining information, dumped into the UltraMgr database.
Notepad Screen
Note
The Notes key always returns you to the Alignment Notepad
screen. Press <Alt> <Note> to access the new user-defined
notes area (see “Creating Notes” on page 3-42 for more infor-
mation.)
Predefined Notes
The 70 predefined notes are separated into four categories:
Feet/Base
General Observations
Coupling/Shaft
Movement Related