User Manual

9-11
UltraSpec Analyzer Battery Maintenance
4
5···· Tuck the battery pack tabs into the case on the sides of the battery pack.
Make sure that the tabs do not interfere with the installation of the
bottom panel.
6···· Replace the bottom panel and screws.
Caution!
Do not change the battery pack with the battery charger connected as
damage may occur to the analyzer.
See “Using the Model 8211 and Model 8212 Battery Chargers” on page
9-14 for information about recharging batteries using the 8211 battery
charger.
Note
Optional accessories that provide alternative charging
methods are available for the UltraSpec analyzer, see “Acces-
sories and Optional Products” in the Appendices.
strip contacts