User Manual

4-38 Setting Up and Using Laser Alignment Fixtures
Note
When connecting the Lemo connector to its mating connector,
line up the red dots located on each connector with each other
before completing the connections.**
4. ··· Connect the Lemo connector on the opposite end of the extension
cable to the Lemo port under the nose of each 8215/8225.
Note
When connecting the Lemo connector to its mating connector,
line up the red dots located on each connector with each other
before completing the connections.**
Caution!
**To complete connection, push connecter together. DO NOT TWIST.
5. ··· Turn the UltraSpec analyzer on.
From this point on, Direct Connect is very easy to use. The analyzer deter-
mines that it is connected and disables the RF communication. Cables can
be unplugged and reconnected at any time (and at any connection). You do
not have to remember which cable is plugged to which head. Even if you
switch the orientation of the cables (when reconnecting), the analyzer can
adjust to the change and will still work correctly.