Manual

G-8
Static Alignment
See Cold Alignment.
Stored Job
A job that has been moved from the current job location and stored in
memory. All the data related to that particular job will then be available for
recall.
TIR
Total Indicator Runout. The total movement in mils that an indicator would
read after the shaft is rotated 180° or 360°.
Thermal Growth
Movement of shaft centerlines associated with (or due to) a change in
machinery temperature between the static and
operating condition.
Thermal Profile
A secondary alignment method used to measure thermal growth.
Torsional Play
The relative rotation between two coupled shafts that will cause the fixtures
to move out of phase with each other (also called backlash).
Tolerance
The maximum permissible deviation from a specified alignment position,
defining the limits of offset at the coupling center and angularity.
UltraMgr
CSI’s database management software package used to store technology
specific information such as alignment or balancing job details.
Unassigned Job
A job that has not been assigned to stations and machines in the UltraMgr
database.