Manual Chapter 5

5-47
Machine Moves
After the fixtures are in the chosen rotational position, press the Delete key
to start the live mode, and then move the machine(s) until they are within
tolerance.
Live Mode active with machine position more than
2 x out of acceptable tolerance
Live Mode active with machine position more than
1 x but less than 2 x out of acceptable tolerance
Warning!
When the machine(s) are within tolerance, before exiting
the Live mode, tighten the machine hold down bolts. If
readjustments to the machine(s) remain within tolerance
when the hold down bolts are tightened, then press the
Enter key to exit Live mode and return to the Machine
Moves screen.