Manual Chapter 5

5-11
General Overview
Main Menu Display
The Main Menu items are shown and described in the following section.
Main Menu Display
1.····Use this section to complete all items necessary to document the job
properly.
2. ···Allows you to locate feet that are causing machine problems
(including relative severity).
3. ···Section where alignment data is acquired.
4. ···Displays graphical representation of the present alignment condition
in offset and angle.
5. ···Calculates required machinery moves, both vertical and horizontal.
A real time machine move is provided for machine positioning.
6. ···Program header – identifies program as Pro Align Plus.
7.····Total number of notes that are stored with the Current alignment job
(up to 40).
8. ···An X appears after each function that has been properly performed.
1
2
3
4
5
6
7
8
9
10
12
11