Manual Chapter 1

3-26 Options and Hardkey Functions
• Current – allows the alignment data for the job currently in the ana-
lyzer to be printed (the current job can be printed even though it is
not in the stored area).
• Select One – allows the screen listing all stored jobs to appear. High-
light any job by pressing the Up Arrow or Down Arrow and press
Enter to print it. After the job has finished printing, the stored jobs
list will reappear. You can then select another job for printing, if
desired.
After selecting either a Current or Stored entry, press the Enter key to print
the job(s). During the printing, a note stating that the job is currently being printed
will appear. To stop printing, press the Reset/Main key and the Main menu will be
displayed.
Printing can be done either directly to a compatible external printer via the
Model 720A Printer Interface or to any printer supported by Microsoft
Windows operating system via the Virtual Printer program.
Caution!
DO NOT connect the printer directly into the RS232 port located on
the top panel of the analyzer. Read the steps on pages 3-27 to 3-29
before printing directly from the analyzer.