Manual Chapter 1

2-31
UltraSpec Analyzer Utility Functions
Note
Changing contrast in normal light often appears to change only
the tint. In certain situations, however, changing the viewing
angle of the screen can make a significant difference in clarity.
PC Display: - This function enables a computer, loaded with appropriate
software, to display the analyzer’s screen on the computer monitor using
the 639 communication cable. This feature is intended for demonstration
and training purposes and is not used during normal operation of the ana-
lyzer and should be set to Off.
Note
To display and acquire data simultaneously a splitter adapter
(e.g., model 8003) is required.
Printer Type – Epson, Deskjet, Epson-2, or Virprint.
• Epson – use any Epson-compatible dot matrix printer
• Deskjet – use when printing to HP Deskjet printer
• Epson-2 – same as Epson but with compressed line spacing in
graphics mode. This is useful for some printers that leave graphics in
the graphics mode.
• Virprint – A printer emulation program from CSI. Used to print data
from the analyzer via the Virprint (Virtual Printer) program to any
printer supported by the Windows operating system. See “Screen/
Print Key” on page 3-25 for more information on printing.
Note
Switching printer types with the 720A attached might require
letting the 720A printer interface sit unconnected for about five
minutes. If you are using a printer interface with a reset button,
it should be pressed after changing the printer selection.