Manual Chapter 1

2-28 Basic Analyzer Operations
Units
Data Units parameters define how the analyzer will display and collect
data. The Units mode specifies whether data are to be displayed in English
or Metric and Hz or CPM.
10
Note
The Units mode is the only parameter under Units Function
used by the Alignment application.
The <Data Units> column lists the available types of converted data. The
<Data> column specifies how the acquired data will be displayed for each
data unit. Press any key in the lower section of the keypad to step through
and select RMS, Peak, and Pk-Pk.
Date and Time
This function sets the current date and time on the UltraSpec analyzer using
Greenwich Mean Time (GMT) format. Greenwich Mean Time is equiva-
lent to Universal Time Coordinates (UTC) and Zulu (Z) time. It is measured
from the Prime Meridian originating at Greenwich, England.