Manual Chapter 1

1-3
How To Use This Manual
How To Use This Manual
This manual is arranged in the following manner:
• The following sections of Chapter 1 provide information that should
be read before attempting to use the UltraSpec analyzer or before
proceeding to read the remaining chapters.
• Chapter 2 – introduces the basic features of the analyzer including
descriptions of the front panel keypad and utility functions such as
communications, transferring data via a modem, and system setup.
Information is also provided about setting up and communicating
with the UltraMgr software.
• Chapter 3 – describes options and other hardkey functions such as
storing, recalling, and deleting jobs, alignment setup, using the
screen/print key, and finding, creating, and storing notes.
• Chapter 4 – lists and describes the various components that make up
the laser alignment system.
• Chapter 5 – provides a general system overview and information on
defining and modifying a job, taking and checking data, viewing
machine moves and storing data sets, and printing an alignment job.
• Chapter 6 – provides specific instructions on the various ways to
acquire alignment data.
• Chapter 7– describes how to perform straightness measurements.
• Chapter 8 – contains application information.
• Chapter 9 – for your convenience, groups system maintenance and
troubleshooting information into one location.