Manualshelf

Manual Chapter 1

ManualsBrandsComputational Systems ManualsElectronicsLaser Alignment Fixture
21222324252627282930
1-22 Read This First
Windows Download Procedure
1. ··· Connect the analyzer to either the COM1, COM2, COM3, or
COM4 port of the computer using the supplied communications
cable.
2.··· On the computer, place the floppy disk containing the firmware into
drive A (or B).
3.··· From Windows, select the Start button and then choose Run. Type A:
(or B:) \LOADFW.EXE and then select the OK button. Depending
on whether this application has previously been run, either the Main
Menu or Configuration screen will be displayed. (Note: The screens
may be configured differently than what is shown).
Figure 10. Windows Downloader Configuration Screen
Figure 11. Windows Downloader Main Menu