Manual Chapter 1

1-20 Read This First

As each application is loaded, you will see a prompt asking whether to

continue with the next step or load another application.

13. · If additional applications were listed on the ﬁrst diskette, answer Yes

and press the Enter key to continue. Otherwise, insert the next

application diskette at this time, answer Yes, and press the Enter key.

14. · When the last application program has been loaded, answer No and

press Enter.

After the desired application(s) are loaded, you must use Select Appli-

cation to designate the active application.

15. · Exit the Download program. At the computer, press the F10 key to

exit the DOS Download program.

Note

Depending on the amount of memory available, no more than

six applications can be loaded into the analyzer at the same

time. In an analyzer with only 0.5 Mb of memory available, no

more than one or two applications can be loaded at the same

time, depending on the application.

Note

Although individual ﬁrmware programs are shipped on sepa-

rate diskettes, all programs serialized for the same instrument

can be copied to a single diskette (for downloading) if desired.

To do this, copy all *.DLH and *.TSK ﬁles to the base ﬁrmware

diskette.