Manual Chapter 1

1-10 Read This First

Installing the Application

If this application package was purchased with an UltraSpec analyzer, it

should be pre-loaded before shipment. However, if the program was not

pre-loaded or has been purchased at a later date, these instructions will

assist you in installing the application.

Should you have any problems, contact CSI Customer Support for assis-

tance.

Using UltraSpec Analyzer with a PC

The following section explains how to set up communications between the

UltraSpec analyzer and a PC. Communications must be established prior

to completing either of these functions:

• Loading ﬁrmware and applications, or

• Moving jobs to or from the analyzer.

Communicating With the PC

A special 25- to 9-pin communications cable (Model 639) is supplied with

the UltraSpec analyzer to connect the analyzer with a host computer. Con-

nect the male end of this cable to the serial port on top of the analyzer and

the female end to the COM port on the computer (normally COM1).