Manualshelf

Manual Chapter 4

ManualsBrandsComputational Systems ManualsElectronicsLaser Alignment Fixture
11121314151617181920
4-22 Setting Up and Using Laser Alignment Fixtures
Positioning a Mounting Base
Tighten one of the mounting bases and rotate it (along with the shaft) until
it is somewhat level at the top of the rotation.
To tighten the mounting base, use
a 9/16 inch wrench or your hand, depending on which chain tightener is being used
.
Caution!
Do not overtighten the chain – the maximum tightening torque is 10
ft.-lbs.