User Manual
By Firstech, LLC 8
Quick Reference
Quick Reference
9 By Firstech, LLC
Button Duration
One Tap Drive Lock On/Off Turbo Timer On/Off Auxiliary 1 Auxiliary 2
Button(s) Duration Function
Half second Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the alarm is triggered).
Turns the shock sensor on/off. (ALARM IT or MAX IT systems only)
Valet mode (see Valet Mode Section for details)
Option programming menu 1. For use during installation.
Activates timer start mode. Timer start mode has multiple programmable settings: duration settings,
temperature settings and self start settings.
Option programming menu 2. For use during installation.
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Accesses Remote Option Menu. See Remote Option Menu Table for details.
2.5 seconds
Half second
2.5 seconds
Half second
2.5 seconds
Half second
2.5 seconds
Feature Turns Feature Button Remote Function / Description
On or Off Duration Chirp(s)
Enter and Exit
Remote Menu
2.5
Seconds
Three On |
Three Off
Enters and Exits Remote Option Menu. The LED will flash purple.
2 Way Paging
Display
Half
second
One-Half
Paging | Two-
Full Paging
Determines whether your remote is used for Alarm or Start Only system. Set it to FULL
for ALARM IT and MAX IT features. Set to HALF for START IT ONLY systems. If on,
LED will flash blue. When turned off, the LED will flash red twice.
Important: The 2W902R-SP is defaulted in HALF for START IT systems. It must be
changed to FULL for alarm systems.
Silent
Half
second
One On |
Two Off
Turns the silent mode on or off. If on, LED will flash blue. When turned off, the LED will
flash red twice.
2nd Car Mode
Half
second
One On |
Two Off
Puts your remote into 2nd Car Mode. You can control another vehicle with the same remote as long as
it has the same RF Kit installed. If on, LED will flash blue. When turned off, the LED will flash red twice.
Automatic
Button Lock
Half
second
One On |
Two Off
Locks all buttons on the remote automatically after one minute. Tap any button then the
button(s) you would like to use to send a command from the remote to your vehicle. If on,
LED will flash blue. When turned off, the LED will flash red twice.