User`s guide

©
2001
Firstech, Inc
.
Page
9
Valet Mode
Valet Mode is intended to deactivate most of the features of your CompuStar 2WSSR system especially the security alerts/monitoring and remote starting.
The only feature operating in valet mode is the keyless entry function and optional auxiliary functions. This mode allows a valet to operate your car with your
authorization without him or her triggering all the security features or remote-
starting your vehicle. Also, Valet Mode is very useful when washing your vehicle
or having it serviced.
In order to enter Valet mode, press Buttons (I+III) simultaneously for a ½ second. The remote-pager CompuGLO LCD will display a ZZZ icon indicating that
you are in Valet Mode. In order to manually enter Valet Mode, insert your car key into the ignition and turn the ignition on and off five times within 10 seconds.
See the illustration below for a typical ignition harness of a vehicle.
You can exit Valet Mode only by pressing Buttons (I+III) simultaneously for a ½ second.
Timer Start Mode
In Timer Start Mode, your car automatically starts every 1.5 or 3.0 hours depending on preset options during the time of installation for a 24-
hour period. This
mode is deleted automatically after 24 hours or once you start your car with either your manual key or remote-pager. In order to enter Timer Start Mode, pre
ss
Buttons (II+IV) simultaneously for a ½ second.
A red-bordered indicator box labeled Timer will darken on the top of your CompuGLO LCD demonstrating that you are in Timer Start Mode. Press Buttons
(II+IV) simultaneously for a ½ second to exit Timer Start Mode. Timer Start Mode is automatically cancelled when you start the vehicle with the key or by
remote.
Also, note that Timer Start Mode becomes Cold Start Mode once an optional temperature sensor is installed. See page 10 for more details.
Important! Timer Start Mode should be used only in open areas. Never start and run the vehicle in an enclosed space such as a garage or carport.
OPTIONAL PROGRAMMABLE FEATURES
These additional programmable features can be programmed to the CompuStar system by your authorized CompuStar dealer.
Ignition Lock
This programmable option enables your vehicle to automatically lock the doors upon pressing the brake pe
dal after the vehicle has been started with a key. In
addition, the vehicle will automatically unlock the doors upon pulling the key out from the ignition. This option must be chosen at the time of installation.
Passive Arming
You can turn this function on or off by pressing Buttons (II+III) for a ½ second.
When set to passive arming, your security system will arm automatically 30 seconds after all th
e car doors are closed. There are two types of passive arming
that can be programmed by your CompuStar dealership: (1) passive arming with passive lock and (2) passive arming without passive lock
Passive locking means the door will lock when the system
passively arms. In the default factory setting, the system is armed and locked actively which means
the system will only arm/lock when the remote-pager is utilized.
Turbo Mode
If this optional Turbo Mode has been programmed at the time of installation, you can turn this feature on and off by pressing Buttons (III+IV) for a ½
second.
Under this mode, engine continues running for 2 minutes after key has been taken out from the ignition if emergenc
y brake was on when the key is taken out.
To utilize this mode, the emergency brake sensing wire has to be connected to the emergency brake wire of the vehicle. Consult the authorized dealer for this
mode.