User`s guide

©
2001
Firstech, Inc
.
Page
5
Icon Explanation
Shock Indicates if the Shock Sensor is on or off. See page 7.
Turbo Indicate if Turbo Mode is on or off. See page 9.
Timer Indicates if Timer Start Mode is on or off. See page 9.
Passive Indicates if Passive Arming Mode is on or off. See page 9.
Indicates that the second stage shock sensor has been
triggered.
If the icon appears continuously, you are in vibration mode. If
the icon blinks, the first stage shock sensor has been triggered.
See page 8.
Indicates if you are in Valet Mode. See page 9.
Indicates if your car parking lights are flashing.
Indicates that your car siren is turned on or off when you lock or
unlock the vehicle.
Indicates that someone is paging you from your vehicle.
Displays if your car is locked or unlocked.
Indicates if your remote-pager is transmitting signals to the
controller unit.
Displays remaining battery life.
Displays if your door is open.
Displays if your vehicle has auto-started properly or ignition on.
Displays if your trunk is open.
Remote-Pager Button Functions
The user can activate differing functions of CompuStar 2WSSR system by pressing one or two buttons simultaneously [ex. (I+IV)
] located on the antenna side
of your CompuStar remote-pager.
Channel Button Press
for
Function Factory
Setting
1. I 1/2 sec Alarm Mode - on/off
RPS – on/off
2. II 1/2 sec Auxiliary Option 1
3. III 1/2 sec Auxiliary Option 2
4. IV 1/2 sec Query Function
5. I - 2 sec Alarm Mode – on/off
RPS – on/off
6. II - 2 sec Auto-start Function - on/off
7. III - 2 sec Trunk Release – on/off
8. IV - 2 sec Panic Mode
9. (I+II) 1/2 sec Car Siren for Lock/Unlock-on/off On