Specifications

DRÄGER GAS DETECTION | 06
T
EC HNIC A L DATA
Dimensions (W x H x D) 47 x 129 x 31 mm, (1.85” x 5.08” x 1.22”)
W
eight Approximately 220 g, (7.8 oz.)
Ambient conditions Temperature -20 to +50 °C, -4 to +122 °F
Pressure 700 to 1300 mbar, 20.7 to 38.4 inch Hg
Humidity 10 to 95% RH
Alarms Visual 180°
Audible Multi-tone >90 dB at 30 cm, 1 ft.
Vibration
Battery options Alkaline, rechargeable NiMH cells for alkaline pack, T4 battery pack
Operating times > 12 hours, with pulsed mode > 40 hours
Charging times < 4 hours
Data logger Can be read out via infrared approx. 1000 hours with 5 gases and a recording
interval of 1 reading per minute.
Pump operation Maximum hose length 20 M, 65.6 ft.; 30 hours with 3 ”AA” alkaline
Approvals ATEX I M1 Ex ia I
II 1G Ex ia IIC T3
I M2 Ex d ia I
II 2G Ex d ia IIC T4/T3
UL Class I & II, Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3
CSA Class I, Div. I Group A, B, C, D, T-Code T4/T3
MSHA Pending
IECEx Ex ia I
Ex ia IIC T3
Ex d ia I
Ex d ia IIC T4/T3
CE mark Electromagnetic compatibility (directive 89/336/EWG)
RoHS Directive 2002/95/EC
Description Order No.
Dräger X-am 5000, basic instrument without power supply unit, with data logger, with manufacturer's 83 20 000
and calibration certificates. Order battery and sensors separately.
Contact Dräger for additional sensors for the X-am 5000.
Alkaline power supply with AA batteries (2 required) 83 18 703
Rechargeable NiMH power supply unit T4 45 43 708
Additional power supply units
Battery charging set, consisting of: NiMH power supply unit T4 with charger module and connection cable 83 18 785
(for worldwide use) for one charger module
Alkaline batteries (2 pc.) for alkaline power supply 83 18 708
NiMH batteries T3 for power supply unit 83 18 703, external charging (2 pc. necessary) 83 19 426
OR D E R INFOR M ATION
C O N TAC T C U S T O M E R S ER V I C E F O R K I T C O N F IG U R AT I ON S ( 1 - 8 00 - 85 8 - 1 73 7 )