Specifications

Multiple gas measurement capabilities in
one compact package.
The Dräger X-am 7000 Monitor combines electrochemical (EC), catalytic oxida-
tion (CAT), photo ionization (PID) and infrared (IR) sensing technology for a total
of up to 5 sensors. You can choose from over 25 different electrochemical
Dräger-Sensors
®
, 2 different catalytic sensors, a PID Sensor and 3 different IR
sensors.
The Dräger X-am 7000 is the smallest gas
monitor in the world that can utilize all of
these technologies in one compact package.
The multiple gas measurement and internal
pump capabilities make this unit an ideal
choice for confined space entry applications
like those found in refineries, chemical
plants, utility passage ways, and paper mills.
The Dräger X-am 7000 Monitor has many
“strengths”. The strong internal pump can
draw gases from well over 150 ft. (45 m).
This is useful for deep ship holds, large stor-
age silos or reaction towers in refineries. The
integrated rubber boot and strong advanced
polymer enclosure of the Dräger X-am 7000
withstands the toughest industrial environ-
ments, providing good resistance against
dust, RFI interference, rain, and extreme
temperatures. Loud audible and bright visual
alarms warn the user that hazardous levels of
gas are present. The standard NiMH battery
pack will last well in excess of an 8-hour shift
and the optional high capacity battery will
allow operation times of greater than 20
hours.
Another strength of the Dräger X-am 7000
is the optional IR Sensor. The infrared
combustible gas (IR-Ex) sensor measures a
wide range of hydrocarbons. However, unlike
catalytic sensors, the IR sensor will measure
hydrocarbons in inert backgrounds (without
oxygen). The IR-Ex is very good at measur-
ing heavier hydrocarbons (like turpentine,
kerosene and jet fuels) from ppm to %LEL
levels. Gases that poison catalytic sensors
such as H
2
S, halogenated hydrocarbons, and
silicones have no effect on the IR-Ex Sensor
making it ideal for industries that make or
use these types of compounds. Gases like
methane and propane can be measured in
ppm, %LEL, and %Vol. measurement ranges
(with the same instrument), which make the
X-am 7000 well suited for the natural gas
industry.
The IR-CO
2
sensor makes the X-am 7000
the ideal choice for breweries, carbonated
beverage bottlers, and bulk gas handlers
who need to measure Carbon Dioxide. The
IR-CO
2
sensor detects from low ppm levels
to %Vol. concentrations of CO
2
.
The smart PID sensor measuring a wide
range of VOC’s up to 5,000 ppm, depending
on the gas selected. The Dräger X-am 7000
has 20 compounds pre-programmed in its
library and 3 user programmable entries
available. This sensor is well suited for
confined space entry, area monitoring and
HazMat applications.
DRÄGER X-AM 7000
09 | DRÄGER GAS DETECTION
ST-2642-2003
ST-2660-2003ST-2770-2003