User`s guide

X'026A01' Insufficient Source Image Data
Explanation: The number of source image bytes
received < the number implied in the Write Image
Control command.
Alternate Exception Action: None.
X'026A02' Invalid LPD Initial Inline Coordinate
Explanation: On a Logical Page Description
command, the initial inline coordinate value is not a
valid or supported value.
Alternate Exception Action: None.
X'026B01' Excess Source Image Data
Explanation: The number of source image bytes
received > the number implied in the Write Image
Control command.
Alternate Exception Action: None.
X'026B02' Invalid LPD Initial Baseline Coordinate
Explanation: On a Logical Page Description
command, the initial baseline coordinate value is not a
valid or supported value.
Alternate Exception Action: None.
X'027002' Invalid Units Value in an XOH SMS
Command
Explanation: The units value in an XOH SMS
command is invalid or unsupported.
Alternate Exception Action: None.
X'027202' Invalid SMS X-Extent
Explanation: On the Set Media Size command, the
X-extent is not a valid or supported value.
Alternate Exception Action: None.
X'027302' Invalid SMS Y-Extent
Explanation: On the Set Media Size command, the
Y-extent is not a valid or supported value.
Alternate Exception Action: None.
X'027402' Invalid SMS Unit Base
Explanation: On the Set Media Size command, the
unit-base is not a valid or supported value.
Alternate Exception Action: None.
X'028101' Insufficient Storage for Overlay or
Page Segment
Explanation: There is insufficient storage to process
an overlay or page segment.
Alternate Exception Action: None.
X'028501' Invalid DO Parameter Value
Explanation: The Overlay Identifier on the Deactivate
Overlay command is not a valid or supported value.
Alternate Exception Action: None.
X'028A01' Invalid DPS Parameter Value
Explanation: The Page Segment Identifier on the
Deactivate Page Segment command is not a valid or
supported value.
Alternate Exception Action: None.
X'029001' Overlay Number Outside Valid Range
Explanation:
1. The Overlay Identifier on the Begin Overlay
command is not a valid or supported value.
2. The Overlay Identifier on the Include Overlay
command is not a valid or supported value.
3. The Overlay Identifier on a Load Copy Control
command is not a valid or supported value.
Alternate Exception Action: None.
X'029101' BO Overlay Number Already Loaded
Explanation: The host attempted to download an
overlay from the Begin Overlay command that already
exists in the printer.
Alternate Exception Action: None.
X'029102' Invalid Request Resource List
Parameter
Explanation:
1. The Requested Ordering parameter of a Request
Resource List order is not a valid or supported
value.
2. The Entry Index parameter of a Request Resource
List order is not a valid or supported value.
3. The Resource Qualifier parameter of a Request
Resource List order is not a valid or supported
value.
4. The Resource Type parameter on the Request
Resource List order is not a valid or supported
value.
Alternate Exception Action: None.
210 Programmer Manual