User`s guide

Table 2. IPDS Command Code Summary for the 4247 Printer (continued)
Cmd
Hex
Code Description Initial State Ending State
WBCC D680 Write Bar Code Control Page, Page Segment, or
Overlay
Page Bar Code Block, Page
Segment Bar Code Block, or
Overlay Bar Code Block
WBC D681 Write Bar Code Page Bar Code Block, Page
Segment Bar Code Block, or
Overlay Bar Code Block
No Change
WGC D684 Write Graphics Control Page, Page Segment, or
Overlay
Page Graphics Block, Page
Segment Graphics Block, or
Overlay Graphics Block
WG D685 Write Graphics Page Graphics Block, Page
Segment Graphics Block, or
Overlay Graphics Block
No Change
WIC D63D Write Image Control Page, Page Segment, or
Overlay
Page Image Block, Page
Segment Image Block, or
Overlay Image Block
WI D64D Write Image Page Image Block, Page
Segment Image Block, or
Overlay Image Block
No Change
WT D62D Write Text Page, Page Segment, or
Overlay
No Change
BO D6DF Begin Overlay Home Overlay
DO D6EF Deactivate Overlay Home Home
IO D67D Include Overlay Page or Overlay No Change
BPS D65F Begin Page Segment Home Page Segment
DPS D66F Deactivate Page Segment Home Home
IPS D67F Include Page Segment Page or Overlay No Change
LE D61D Load Equivalence Home Home
LFE D63F Load Font Equivalence Home, Page, Page Segment,
or Overlay
No Change
DF D64F Deactivate Font Home Home
END D65D End See Note 2 See Note 2
Notes:
1. The Discard Buffered Data subcommand in the Execute Order Any State command causes the printer to enter
the home state.
2. The End command is valid in any page block, overlay block, or page segment block state and causes the printer
to return to the corresponding page, overlay, or page segment state.
Figure 11 on page 91 shows all of the IPDS states and their commands. Notice that some commands can
only occur in a specific state, some commands can occur in more than one state, and some commands
can occur in any state. Also note that the printer can only enter the page state, the page segment state,
and the overlay state from the home state.
90 Programmer Manual