User Manual Part 2

85
Resetting the Macro Parameters to the Factory Defaults
TUNING.VERT. 0
↑
MACRO -> MFG NO
→
or
←
MACRO -> MFG YES
→
or
←
↓
NEXT MACRO? NO
MACRO -> MFG NO
The new values set for the macro parameters will be the used.
MACRO -> MFG YES
The values set for the macro parameters will be reset to their factory
defaults.
Selecting Another Macro
MACRO -> MFG NO
↑
NEXT MACRO? NO
→
or
←
NEXT MACRO? YES
↓ ↓
CONFIG MENU NO MACRO # 1
To pass over to another macro, select
NEXT MACRO YES
.
Pressing the
↓
or
↑
key the item
MACRO#
1 is displayed, then press the
→
key to pass over to
MACRO#2
(
MACRO CHANGING
is
displayed
).
When passing over from one macro to another, the fanfold paper loaded from the paper path,
selected in the previous macro, will be automatically parked (
TEAR IF NECESS/PARK PAPER
is
displayed). Tear off this fanfold paper and press the PARK key.
You can now set the parameters for Macro#2 as described above. In this way you prepare the
second printing environment .