User Manual Part 2

79
Paper Path Selection
This function defines the default paper path for the current macro.
SLASH ZERO NO
↑
PATH LOWER PUSH
→
or
←
PATH UPPER PUSH (9078D plus only)
→
or
←
PATH MANUAL FORM (9078 plus only)
→
or
←
PATH PUSH PULL
→
or
←
CUT + LOWER PUSH (9078 plus only)
→
or
←
CUT + FRONT PSHPUL (9078 plus only)
→
or
←
PATH ASF 1
→
or
←
PATH ASF 2
→
or
←
PATH ASF 3
→
or
←
↓
TEAR NORMAL
PATH LOWER PUSH
Paper loading with the lower push tractor.
PATH UPPER PUSH
Paper loading with the upper push tractor (9078D plus model only).
PATH MANUAL FORM
Paper loading using the manual single sheet path (9078 plus model only).
PATH PUSH PULL
Paper loading using the lower push tractor and the rear pull tractor.
CUT + LOWER PUSH
Paper loading using the manual paper path in overlay over the paper
loaded with the lower push tractor. The paper overlay function must be set
to PAPER OVERLY YES (9078 plus model only).
CUT + FRONT PSHPUL
Paper loading using the manual paper path in overlay over the paper
loaded with the push-pull tractors. The paper overlay function must be set
to PAPER OVERLY YES (9078 plus model only).
PATH ASF1
Paper loading from the first bin of the ASF, if installed.
PATH ASF2
Paper loading from the second bin of the ASF, if installed.
PATH ASF3
Paper loading from the third bin of the ASF, if installed.