User guide

Mar 01
Compuprint PageMaster 280 User Guide 3-9
PS Menu
PS Menu
The PS Menu provides access to the PostScript settings. Use the following procedure to enter the
PS Menu:
1. Press the MENU buttononthecontrolpanel.
2. Press the NEXT button until the text “PS Menu” is shown on the second line of the display.
3. Press the SELECT button to enter the PS menu.
4. Press the NEXT button to move through the submenus: Print PS Errors,andManual Feed
TO.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the PostScript settings:
PCL Menu
The PCL Menu provides access to the PCL settings. Use the following procedure to enter the PCL
menu:
1. Press the MENU buttononthecontrolpanel.
Submenus Default
Setting
Available
Settings
Procedure for Changing Setting
USB Setup
This submenu allows you
tochoosesetuptheUSB
interface. When the USB
port is on, the parallel port
is off.
Interpreter:
Auto Switch
Format:
Raw
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
1. Press NEXT or PREVIOUS to toggle between
INTERPRETER and FORMAT submenus.
2. Press SELECT to choose either submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to save this setting.
Submenus Default
Setting
Available Settings Procedure for Changing Settings
Print PS Errors
This submenu allows you
to choose to either print
or not print PS errors.
Off On
Off
1. Press NEXT or PREVIOUS to toggle between ON
(print) and OFF (do not print).
2.PressSELECTtosavethissetting.
Manual Feed TO
This submenu allows you
to set the manual feed
timeout—the number of
seconds the printer shold
wait for a manual feed. A
setting of 0 will cause
printer to wait indefinitely
for a manual feed.
0 0 - 99999 1. Press NEXT or PREVIOUS to increase or
decrease each digit of the five-digit number.
2. Press SELECT to move to the next number.
3. Press SELECT after setting the last digit to save
the setting.