User guide

Mar 01
Compuprint PageMaster 280 User Guide 8-7
Installing the High Capacity Feeder
11. Insert the plug of the power cord into the AC outlet, and turn the printer on by pressing
[ I ] on the power switch on the right side of the printer.
12. Check the display to make sure the printer is ready for printing.
NOTE: If an error message is shown when you turn on the printer, see “Warning Messages and Error
Messages” on page 5-39.
Installing Only the High Capacity Feeder
Use the following procedure to install the high capacity feeder:
1. Turn the printer off by pressing [ O ] on the power switch on the right side of the unit, and
disconnect the power cord from the AC outlet.
WARNING: Before installing any options, turn the printer off by pressing [ O ] on the power
switch on the right side of the unit and disconnect the power cord from the AC outlet.
These precautions are necessary to avoid the risk of electric shock.