User guide

Mar 01
Compuprint PageMaster 280 User Guide 7-17
Solving 500 Sheet Feeder Problems
Interpreting Paper Feeder Error Messages
The printer control panel displays error messages when there is a problem with the printer or any of
the optional paper-handling components. The following table lists all of the error messages associ-
ated with the 500 sheet paper feeder, the possible cause of the error, and the action to take to correct
the problem. If the control panel shows an error message that concerns another part of the printer,
refer to Chapter 5: Troubleshooting for a complete list of all warning and error messages.
Installation Problems
Simple oversights during installation may cause problems when you first use the paper feeder. If the
paper feeder is inoperative after you have installed it, use the following procedure to check several
possible causes.
Error or Warning
MessageLine1
Error or Warning
MessageLine2
Possible Cause Action
(Warning message, printer
continues operating and line
1 shows printer status.)
Tray2Missing
(applies to first paper
feeder if installed)
Tray 2 is not installed. Install the tray.
Tray3Missing
(applies to second
paper feeder if
installed)
Tray 3 is not installed. Install the tray.
Paper Low Tray 2
(applies to first paper
feeder if installed)
Paper supply in tray 2
is low.
Add paper to the tray.
Paper Low Tray 3
(applies to second
paper feeder if
installed)
Paper supply in tray 3
is low.
Add paper to the tray.
Paper Out Tray 2
(applies to first paper
feeder if installed)
There is no paper in
tray 2.
Add paper to the tray.
Paper Out Tray 3
(applies to second
paper feeder if
installed)
There is no paper in
tray 3.
Add paper to the tray.
E1 JAM TRAY/REGI Remove paper There is a jam between
thesourcetrayandthe
registration sensor.
E2-1 JAM MISFEED Remove paper There is a misfeed jam
nearthesourcepaper
tray.
Remove the jammed
paper from the source
tray.
LOAD PAPER TRAY2
(applies to first paper
feeder if installed)
Paper Size/
Paper Type
Tray 2 is empty. Load paper into the tray.
LOAD PAPER TRAY3
(applies to second paper
feeder if installed)
Paper Size/
Paper Type
Tray 3 is empty. Load paper into the tray.