User manual

Paper Specifications
A78408356-003 53
Paper Specifications
The documents must all guarantee the following characteristics:
•
Use paper matching the indicated characteristics.
•
They must have well defined top and left edges, with a square
angle tolerance of 0.1° on all edges.
•
The paper must not have holes, perforations, folds or tears
anywhere within the print area of the document.
•
The radius on a corner of the form must be within 9.5 mm from
the left or right edge.
•
The form to be printed must not contain foreign material.
•
Form opacity must be at least 75%. Forms with a lower opacity
may cause feed errors.
•
Never print on documents with metallic or hard plastic fasteners
or staples, they may damage the printer. Use only sewn passbooks.
•
To get the maximum print contrast you should print on white or
light colored paper. You may overstrike to improve the low
contrasting paper.
•
It is preferable to use single and multiple documents with the fibre
running in the insertion direction of the printing unit.
•
Recycled paper is permitted on principle.
•
It is preferable to print on multiple forms with a narrow glue strip
or top-gluing. The gluing must not cause waving in the set of
forms.