User manual

Printer Setup
A78408356-003 45
Setup Parameter Values Description
WRAP MODE truncate, autowrap The data exceeding the line length are
truncated (
truncate
) or printed on the
following line (
autowrap
).
SLASHED ZERO disabled, enabled Selects the printing character for zero,
with a slash (enabled) or without
(disabled).
PRINT DIRECTION unidir., bidir.,
sw control
Selects the printing direction of the print
head: unidirectional (
unidir
.),
bidirectional (
bidir
.) or selected via
software (
sw control
).
EJECT ON FF disabled, enabled Performs a form feed according to the
selected page format (
disabled
) or
ejects a cut sheet loaded into the printer
(
enabled
).
CUT SHEET EJECT on front, on rear Selects whether the cut sheet loaded into
the printer is ejected towards the front or
the rear of the printer.
LABEL CONTROL
(only MDP40C
model)
disabled, enabled Controls the AGA (Automatic Gap
Adjustment) when printing on labels.
Selecting
enabled
the print head detects
automatically the paper thickness for the
correct printing on labels. Selecting
disabled
the printer does not perform the
label control function.
PARK MODE
(only MDP40T and
MDP40C models)
immediate
manual imm.
When pressing the PARK key or receiving
a park command, the printer immediately
parks the paper.
When pressing the PARK key, the printer
automatically parks the paper. When
receiving a park command via software:
1. If the current page is not empty (there
is printing data or paper movement
commands have been issued), a form
feed is performed.
2. The paper is moved to the tear-off
position.
3. The P1, P2, P3 and P4 leds blink.
When the ON LINE key is pressed the
printer parks the paper.