User manual

Printer Setup
A78408356-00342
PROGRAM 1 PROGRAM 2
PROGRAM 3
(MDP40T and MDP40C only)
PROGRAM 4
(MDP40T and MDP40C only)
Setup Parameter Values Description
PROTOCOL EPSON 570
IBM XL24E
IBM XL24E AGM
IBM 2390
Defines the printer protocol.
FONT Draft, Courier, OCR-B,
Gothic, Prestige, Presentor,
OCR-A, Script, Boldface,
locked Draft
Selects the font. If you set
locked
Draft
the printer prints always with
this font, independently from the
font set via software.
HORIZONTAL PITCH 10 cpi, 12 cpi, 15 cpi, 17
cpi, 20 cpi
Selects the character spacing in
characters per inch (cpi).
VERTICAL PITCH 5 lpi, 6 lpi, 8 lpi, Selects the line spacing in lines per
inch (lpi).
FORM LENGTH # lines, A4, letter, A5, legal Sets the page length in number of
lines or standard formats A4, Letter,
A5 or Legal. If you select
# lines
,
you must indicate the number of lines
you want to set in the scheme below
this selection. The values range
between 0 and 255. To set the values
combine the numbers considering
that the first line corresponds to the
hundreds, the second line to the tens
and the third line to the units. See the
example below.
Example:
How to set the form length to 82 lines:
FORM LENGTH
(
(
( ) ( ) ( ) ( )
# lines A4 letter A5 legal
Minimum = 0 Maximum = 255 Current = 0
0123456789
100 x ( ) ( )
10 x ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
(
(
( )
1 x ( ) ( )
(
(
( ) ( ) ( ) ( ) ( ) ( ) ( )