User manual

Printer Setup
A78408356-00340
Setup Parameter Values Description
BUFFER CONTROL DTR
XON/XOFF
XON/XOFF+DTR
Selection of the buffer protocol.
ROBUST XON enabled
disabled
Perform the Robust XON (
enabled
) or not
(
disabled
).
WORD LENGTH 7 bit, 8 bit Sets the number of the data bits.
BAUD RATE 600 - 38400 bps Sets the data transfer rate.
PARITY BIT Even, odd, none Selects the parity control for the data.
PASSBOOK TYPE
(MDP40B and
MDP40C models
only)
Fixed thick
Vertical
Horizontal
Special
Printing on a document with fixed thickness.
Printing on passbooks with upright fold.
Printing on passbooks with horizontal fold.
Printing on passbooks with upright fold
having different thickness along the
document.
PASSBOOK WIDTH
(MDP40B and
MDP40C models
only)
auto
setup
Selects the passbook width setting mode.
Selecting
auto
the width of the passbook is
read and set automatically by the printer,
independently from the passbook width set by
menu or software command.
Selecting
setup
the width of the passbook is
set by the user in the menu or by means of a
software command. This selection allows a
particularly accurate printing and is especially
useful when printing on passbooks with
vertical fold and uniform thickness or
passbook with different thickness along the
document.
The values range between 102 and 213 mm.
To set the values combine the numbers
considering that the first line corresponds to the
hundreds, the second line to the tens and the
third line to the units. See the example below.
Example:
How to set the passbook width to 120 mm:
PASSBOOK WIDTH
(
(
setup ( ) auto
mm Minimum = 102 Maximum = 213 Current = 125
0123456789
( )
(
(
( )
( ) ( )
(
(
( ) ( ) ( ) ( ) ( ) ( ) ( )
(
(
( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )