User manual

Printer Setup
A78408356-00336
Filling in the Printer Setup Forms
To change the values of the parameters, fill in the marker ( ) beside
the value you want to set with a black or blue ball-point pen or a
fiber-pen.

Do not use pencils.
AUTOFEED SIGNAL ( ) ( )
disabled * enabled
SLCT-IN SIGNAL ( ) ( )
disabled * enabled
BU FFER CONTROL ( ) ( ) ( )
DTR XON/XOFF* XON/XOFF +

If more than one value is set for a parameter, the printer ignores these
parameters and maintains the currently set value.

Do not fill in the marker beside the title of the preprinted form, otherwise
the printer will not be able to read that page.
Reading the Preprinted Forms
When the Printer Setup Forms have been filled in, insert them back
into the printer. The printer is able to recognize the Setup Forms by
means of the markers on these pages. The printer reads the values
marked for the various parameters and configures the printer
accordingly.
The settings are confirmed by a # symbol printed on the left of the
corresponding marker.