User manual

Printer Setup

A78408356-003 33

Printer Setup

The default configuration of this printer matches most of the

commonly used environments, but it may be necessary to change

some printer parameters. For this purpose it is necessary to use

preprinted forms to be used with the printer in configuration mode.

The following is the complete description of the Setup Procedure.



The detailed description of the parameters that can be set on the

various preprinted forms are described in the “Printer Parameters”

paragraph, later in this manual.

To enter the Printer Setup Mode press and hold the

key for at

least 1 second while powering the printer on. The printer enters the

Setup Mode.

Printing the Printer Setup Forms



If you already have the preprinted forms for the printer setup, go to

“Filling in the Printer Setup Forms” later in this manual.

Insert a blank sheet in A4 or Letter format. The printer loads the

sheet and stops. The

P1, P2

and, if present, the

and

leds are lit.

The

ON LINE

PROGRAM

and

keys are enabled.



If the

key is pressed immediately after the printer enters in Setup

Mode, all printer setup modules are printed.