User manual

Connection to the Host
A78408356-00328
WORD LENGTH ( ) ( )
disabled * enabled
BAUD RATE ( ) ( )
disabled * enabled
PARITY BIT ( ) ( ) ( )
DTR XON/XOFF* XON/XOFF + DTR

If more than one value is set for a parameter, the printer ignores these
parameters and maintains the currently set value.

Do not fill in the marker beside the title of the preprinted form, otherwise
the printer will not be able to read that page.
6. Once the serial interface parameters have been signed, insert the
sheet back into the printer.
7. The printer reads the selected values on the configuration sheet
and sets them. The settings are confirmed by a # symbol printed
on the left of the corresponding marker.
The printer then returns to normal functioning mode.

For a complete description of the printer setup procedure see the
paragraph “Printer Setup” later in this manual.