User manual

40
Setup Parameter Values Description
CODE PAGE
CP437, CP437G,
96GREEK, CP850,
CP851, CP852, CP853,
CP855, CP857, CP858,
CP860, CP862, CP863,
CP864, CP865, CP866,
CP867, CP876, CP877,
GOST, TASS, 8859/1,
8859/2, 8859/3, 8859/4,
8859/5, 8859/6, 8859/7,
8859/8, 8859/9, 8859/15
Selects the code page for both the IBM and the EPSON
emulations.
LINE MODE LF=LF, CR=CR
CR=LF+CR
LF=LF+CR
LF&CR=LF+CR
If the printer receives a LF code (LF), it only performs a line feed.
If the printer receives a CR code (CR), it only performs a carriage
return.
If the printer receives a CR code (CR), it performs a carriage
return followed by a line feed. If the printer receives a LF code
(LF), it performs a line feed.
If the printer receives a LF code (LF), it performs a line feed
followed by a carriage return. If the printer receives a CR code
(CR), it only performs a carriage return.
If the printer receives a LF code (LF) or a CR code (CR), it
performs both a line feed and a carriage return.
WRAP MODE truncate, autowrap The data exceeding the line length are truncated (
truncate
) or
printed on the following line (
autowrap
).
SLASHED ZERO disabled, enabled Selects the printing character for zero, with a slash (enabled) or
without (disabled).