User manual

ESC @

Initializes the printer. (EPSON)

ASCII Code ESC @

Hexadecimal Value 1B 40

Decimal Value 27 64

This sequence causes the printer to be initialized. This command, inserted in the input

buffer, will be executed during data processing, so that data preceding this command

will be printed according to the previous setting.

It causes the printer:

• To go back to the current printer setup settings

• To cancel any print attributes selected

• To initialize the printer carriage

• To reset the column counter

• To set the horizontal tabulations every 8 columns

• To clear all vertical tabulations

Only the selection of Draft/Quality printing, DDL and the selected character generator

are maintained.