User manual

84
DC1
Selects printer. (IBM)
ASCII Code DC1
Hexadecimal Value 11
Decimal Value 17
This command causes the printer to be enabled after it has been disabled by the ESC
Q command.
DC1
Selects printer. (EPSON)
ASCII Code DC1
Hexadecimal Value 11
Decimal Value 17
This command causes the printer to be enabled after it has been disabled by the DC3
command.
DC3
Deselects printer. (EPSON)
ASCII Code DC3
Hexadecimal Value 13
Decimal Value 19
This code deselects the printer. The printer remains deselected until it receives a DC1
command or power is turned off then on again. The printer ignores the ESC @
command (initialize printer) when it is deselected.