User manual

0 (K): ESC K graphic command

1 (L): ESC L graphic command

2 (Y): ESC Y graphic command

3 (Z): ESC Z graphic command

ESC [ g

High Resolution Graphics. (IBM)

ASCII Code ESC [ g

n m data

Hexadecimal Value 1B 5B 67

n m data

Decimal Value 27 91 103

n m data

This command sends data for dot matrix graphics to the printer and allows the

selection of eight modes for both 8-wire graphics and 24-wire graphics.

n (count) Count is a two-byte value in the format of low byte, high byte that

gives the number of bytes of graphic data plus one.

m (mode) Mode is a one-byte value to select the graphics mode. Modes have a

vertical wire count (8 or 24) and a horizontal density in dots per inch.

See the following table: