User manual

5
ESC . Print Raster Graphics. (EPSON) 75
ESC : Sets 12 CPI. (IBM) 40
ESC : Copies characters from ROM to RAM. (EPSON) 69
ESC ? Reassigns dot graphics mode. (EPSON) 76
ESC @ Initializes the printer. (EPSON) 88
ESC [ @ Sets double high printing and double line feed. (IBM) 40
ESC [ \ Sets vertical units. (IBM) 20
ESC [ g High Resolution Graphics. (IBM) 77
ESC [ I Sets font and pitch of a character. (IBM 2391 only) 42
ESC [ K Sets initial conditions. (IBM 2391 only) 89
ESC [ T Selects a Code page. (IBM 2391 only) 61
ESC [d Set the print quality. (IBM 2391 only) 42
ESC \ Sets the relative horizontal print position. (EPSON) 20
ESC \ Prints characters from all characters table. (IBM) 63
ESC ] Sets a reverse line feed. (IBM) 10
ESC ^ Prints a single character from the all characters table. (IBM) 63
ESC _ Sets or cancels overscore printing. (IBM mode) 45
ESC + Sets
n
/360-inch line spacing. (EPSON) 22
ESC = Defines downloaded characters. (IBM) 70
ESC = Sets MSB to 0. (EPSON) 85
ESC > Sets MSB to 1. (EPSON) 86
ESC 0 Selects 1/8-inch line spacing. (IBM, EPSON) 22
ESC 1 Selects 7/72-inch line spacing. (IBM) 22
ESC 2 Selects 1/6-inch line spacing. (EPSON) 23
ESC 2 Enables the line spacing set by ESC A command. (IBM) 23