User manual

58
n
Selection
0 Draft printing
1 Letter Quality printing
If you select proportional spacing with the ESC p command during Draft printing, the
printer prints an LQ font instead. When you cancel proportional spacing with the ESC
p command, the printer returns to Draft printing.
SI
Sets condensed printing. (IBM, EPSON)
ASCII Code SI
Hexadecimal Value OF
Decimal Value 15
This command selects the condensed mode in which character width is reduced as
follows:
10 CPI
→
17.14 CPI
12 CPI
→
20 CPI
Proportional
→
½ width
DC2 code cancels the condensed printing. This command resets the horizontal motion
index (HMI) set with the ESC c command.