User manual

50
ESC M
Selects 10.5 point, 12 cpi. (EPSON)
ASCII Code ESC M
Hexadecimal Value 1B 4D
Decimal Value 27 77
This command selects 10.5-point, 12-cpi character printing. It resets the horizontal
motion index (HMI) set with the ESC c command. If you change the pitch during
proportional mode (selected with the ESC p command) the change takes effect when
the printer exits proportional mode.
ESC P
Selects 10.5 point, 10 cpi. (EPSON)
ASCII Code ESC P
n
Hexadecimal Value 1B 50
n
Decimal Value 27 80
n
This command selects 10.5-point, 10-cpi character printing. It resets the horizontal
motion index (HMI) set with the ESC c command. If you change the pitch during
proportional mode (selected with the ESC p command) the change takes effect when
the printer exits proportional mode.