User manual

ESC G

Sets double strike printing. (IBM, EPSON)

ASCII Code ESC G

Hexadecimal Value 1B 47

Decimal Value 27 71

This command starts double-strike printing. ESC G must be canceled by ESC H.

ESC g

Sets 15 CPI. (EPSON)

ASCII Code ESC g

Hexadecimal Value 1B 67

Decimal Value 27 103

Subsequent data will be printed at 15 cpi. This command is accepted at any position

within the line. This command resets the horizontal motion index (HMI) set with the

ESC c command. If you change the pitch during proportional mode (selected with the

ESC p command) the change takes effect when the printer exits proportional mode.

ESC H

Cancels double strike printing. (IBM, EPSON)

ASCII Code ESC H

Hexadecimal Value 1B 48

Decimal Value 27 72

This command cancels double-strike printing with the ESC G command.