User manual

33
ESC SP
Sets intercharacter space. (EPSON)
ASCII Code ESC SP
n
Hexadecimal Value 1B 20
n
Decimal Value 27 32
n
Range 0 <
n
< 127
This command sets the intercharacter space to n/120 inch in Draft printing and n/180
inch in Quality printing.
ESC X
Sets left and right margins. (IBM)
ASCII Code ESC X
n
1
n
2
Hexadecimal Value 1B 58
n
1
n
2
Decimal Value 27 88
n
1
n
2
Range 0 <
n
1,
n
2
< 255
This command specifies left and right margin positions. The n
1
and n
2
parameters
indicate respectively the number of columns for the left and right margins at the
current spacing. These margins are memorized in terms of absolute displacement from
the physical left edge of the page.
If n
1
is equal to 0, the current left margin of the page is used. If n
2
is equal to 0, the
current right margin of the page is used. The left margin value must be less than the
right margin value. The right margin value must not exceed the physical right edge of
the paper; otherwise the maximum acceptable value for the right margin will be set.