User manual

26
ESC B
Sets vertical tabs. (IBM, EPSON)
ASCII Code ESC B
n
1
… n
x
0
Hexadecimal Value 1B 42
n
1
... n
x
00
Decimal Value 27 66
n
1
... n
x
0
Range 1 <
n
< 255
In EPSON mode, sets vertical tab stops in the 0 Vertical Format Unit (VFU) channel.
This code sets up to 16 vertical tab stops at the line specified by n
1
, n
2
and so on in the
0 VFU channel. The tab stops are memorized as physical positions.
In IBM modes, this code sets up to 64 vertical tab stops at the line number specified by
n
1
, n
2
and so on in the 0 VFU channel. The line at top of form is line 1. The tab stops
are memorized as logical positions.
ESC C 0
Sets form length to n inches. (IBM, EPSON)
ASCII Code ESC C 0
n
Hexadecimal Value 1B 43 00
n
Decimal Value 27 67 0
n
Range 1 <
n
< 22
This command sets the form length to the number of inches specified by n. The current
position of the paper is assumed as top of form. Setting the paper length cancels the
top and bottom-margin settings.