User manual

Setting Spacings
ESC P
Sets horizontal spacing to 10 or 17 cpi (only EPSON
mode)
1B 50
27 80
Terminator code. The spacing is set to 17 cpi if the compressed printing has been
previously selected by SI or ESC SI command.
ESC M
Sets horizontal spacing to 12 or 20 cpi (only EPSON
mode.)
1B 4D
27 77
Terminator code. The spacing is set to 20 cpi if the compressed printing has been
previously selected by SI or ESC SI command.
ESC :
Sets horizontal spacing to 12 cpi (only IBM mode).
1B 3A
27 58
Terminator code.
ESC g
Sets horizontal spacing to 15 cpi (only EPSON mode)
1B 67
27 103
Terminator code. Compressed printing cannot be combined with 15 cpi.
SI or ESC SI
Selects compressed printing.
0F or 1B 0F
15 or 27
Terminator code. In IBM mode, this command sets horizontal spacing to 17 cpi
(compressed spacing), if 10 cpi has been previously set; otherwise it is ignored.
In EPSON mode, the setting of this command depends on the horizontal spacing
previously set: 10 cpi is changed into 17 cpi, 12 cpi is changed into 20 cpi
Appendix A
A.8
A78401745-001